Masina de sanfrenat tabla portabila B-15 AIR-S cu turatii reduse
Date tehnice
FARA CAP DE SANFRENARE! Alegeti capul de frezare pentru unghiul de sanfrenare dorit
- Putere: 2.984 W
- Presiunea aerului / Consumul de aer: maxim 6 bari, / 750 l/min
- Turartia in gol r.p.m.: 4500 rpm
- Latimea sanfrenului:
0 pana la 15 mm < 400N/mm2
0 pana la 8 mm > 400N/mm2 - Greutatea neta: aprox. 7,5 kg
- Unghiul de sanfrenare: optional 30°, 37,5°, 45°, 50° si 60°, alte unghiuri la cerere
- Masina de sanfrenat B15 AIR
- Scule necesare pentru operare si intretinere
- Cutie de transport
- Un manual de operare
- FARA CAP DE SANFRENARE! Alegeti capul de frezare pentru unghiul de sanfrenare dorit
30° milling head PREMIUM - the cutting inserts and the lead roller Ø 30 mm / 1.19“are included |
27223X |
37,5° milling head PREMIUM - the cutting inserts and the lead roller Ø 26 mm / 1.02“ are included |
27227X |
45° milling head PREMIUM - the cutting inserts and the lead roller Ø 26 mm / 1.02“ are included |
27222X |
50° milling head PREMIUM - the cutting inserts and the lead roller Ø 26 mm / 1.02“ are included |
27224X |
60° milling head PREMIUM - the cutting inserts and the lead roller Ø 19 mm / 0.75“ are included |
27240X |
The additional special roller 30° for shorter cutting inserts 8 mm / 0.3“ - diameter Ø 33,5 mm / 1.32“ | 28004 |
The additional special roller 37,5° for shorter cutting inserts 8 mm / 0.3“ | 28013 |
The additional special roller 45° for shorter cutting inserts 8 mm / 0.3“ - diameter Ø 31 mm / 1.23“ | 28005 |
The additional special roller 50° for shorter cutting inserts 8 mm / 0.3“ | 28014 |
The additional special roller 60° for shorter cutting inserts 8 mm / 0.3“ - diameter Ø 25,5 mm / 1.01“ | 28006 |
The spare two sided cutting inserts 15 mm / 0.6“ - two-sided, coated - pack of 10 pcs - only for premium milling heads |
28015 |
The shorter four sided cutting inserts 8 mm / 0.3“ - four-sided, coated - pack of 10 pcs - only for premium milling heads with additional special roller |
28008 |
The fastening screws for cutting inserts (works with both cutting inserts versions) - only for premium milling heads |
28007 |
Edge Cleaner – grinding adapter - including 10 pcs grinding rings grain 40, 1 pc guiding roller |
25310 |
Grinding rings grain 40 for Edge Cleaner - pack of 50 pcs |
25312 |
Spare polyurethane guiding roller for Edge Cleaner | 25311 |
Complete radius milling head R2,5 mm / 0.08“ - including of the guiding roll and fastening screw, the cutting inserts are included - the lead roller diameter Ø 30 mm / 1.19“ |
27234 |
Complete radius milling head R3,5 mm / 0.12“ and R4 mm / 0.16“ - including of the guiding roll and fastening screw, the cutting inserts R3,5 mm / 0,12“ are included - the lead roller diameter Ø 39,5 mm / 1.55“ |
27233 |
Cutting inserts for rounding edges R2,5 mm / 0.08“ - four-sided - pack of 10 pcs |
26109 |
Coated cutting inserts for rounding edges R3,5 mm / 0.12“ - four-sided - pack of 10 pcs |
26110 |
Coated cutting inserts for rounding edges R4 mm / 0.16“ - four-sided - pack of 10 pcs |
26111 |
The fastening screws for cutting inserts - only for rounding milling heads |
27242 |
30° cutting head - including inserts, screws, bolts and roller - guide roller diameter Ø 34 mm / 1.34“ |
27223 |
37,5° cutting head - including inserts, screws, bolts and roller - guide roller diameter Ø 28 mm / 1.10“ |
27227 |
45° cutting head - including inserts, screws, bolts and roller - guide roller diameter Ø 28 mm / 1.10“ |
27222 |
50° cutting head - including inserts, screws, bolts and roller - guide roller diameter Ø 28 mm / 1.10“ |
27224 |
60° cutting head - including inserts, screws, bolts and roller - guide roller diameter Ø 27 mm / 1.06“ |
27240 |
Cutting head with non-standard angle - including inserts, screws, bolts and roller |
27XXX |
Coated cutting inserts - four-sided - pack of 10 pcs - only for ECO milling heads |
27231 |
Screw for the cutting inserts - only for ECO milling heads |
27241 |
Pneumatic set with quick couplings (contains: FRL – filtration, regulator and lubrication unit, quick couplings, hoses 10 m) | 27221 |
Xpipe Beveler – bevelling tool for machining of pipes from Ø 85 mm / 3.36“ (beveler B10 Electra / B15 Electra / B15 AIR is not included) |
25500 |
Special lubricating paste for the milling heads 120g – prevents seizing up, wear, cold-welding, solidifying of the threads |
33005 |
Mag Brush Maxx Large – magnetic sweeper equipped with wheels for collecting all magnetic materials – working width 450 mm / 17.71 in |
NMF0107 |
Mag Brush - collects all magnetic | 18654 |